Cm15 off line problem

[Al Assid]

I'm running 10.4.7 which ma be the problem. This started about  a  
week ago and is effecting both the main and backup machines. I try to  
keep up with the upgrades and I guess thats a mistake.

This is the log report

9/26/06 7:34:07 AM startup script
9/26/06 7:34:39 AM Scheduled Event: Hall (#1)
9/26/06 7:34:39 AM Sending OFF for Hall
9/26/06 7:34:39 AM Interface powerline interface has been  
unexpectedly disconnected from XTension.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM command not sent because interface connection is  
invalid.
9/26/06 7:34:39 AM Setting value of TempShop to 74
9/26/06 7:34:39 AM Setting value of TempOutside to 62
9/26/06 7:34:39 AM Setting value of TempInside to 74
9/26/06 7:34:39 AM Interface "powerline interface" has quit: (with no  
message) code: 0
9/26/06 7:34:45 AM Retry connection to interface "powerline  
interface". Tries left: 5
9/26/06 7:34:45 AM Opening Interface "powerline interface" at: USB
9/26/06 7:34:45 AM Interface "powerline interface" has quit: (with no  
message) code: 0
9/26/06 7:34:50 AM Retry connection to interface "powerline  
interface". Tries left: 4
9/26/06 7:34:51 AM Opening Interface "powerline interface" at: USB
9/26/06 7:34:51 AM Interface "powerline interface" has quit: (with no  
message) code: 0
9/26/06 7:34:56 AM Retry connection to interface "powerline  
interface". Tries left: 3
9/26/06 7:34:56 AM Opening Interface "powerline interface" at: USB
9/26/06 7:34:57 AM Interface "powerline interface" has quit: (with no  
message) code: 0
9/26/06 7:35:02 AM Retry connection to interface "powerline  
interface". Tries left: 2
9/26/06 7:35:02 AM Opening Interface "powerline interface" at: USB
9/26/06 7:35:02 AM Interface "powerline interface" has quit: (with no  
message) code: 0
9/26/06 7:35:07 AM Retry connection to interface "powerline  
interface". Tries left: 1
9/26/06 7:35:08 AM Opening Interface "powerline interface" at: USB
9/26/06 7:35:08 AM Interface "powerline interface" has quit: (with no  
message) code: 0
9/26/06 7:35:13 AM Unable to open the interface, retries exhausted.  
Interface "powerline interface" disabled

On Sep 26, 2006, at 2:39 AM, michael at shed.com wrote:

>
> Good Morning Al,
>
> Did you recently change any software .. or upgrade to 10.4.7  ?
>
> There is a way to close/reopen the CM15 port, but you can experiment
> first... just quit/restart XTension... does the CM15 recover ?
>
> michael
>
> Quoting Al Assid <alassid at mac.com>:
>
>> I'm having a problem with the CM15 on 4X4 becoming inoperative. Is
>> there a software reset for it? When I remove power it comes alive  
>> again
>> I'm running it on a Mini with the latest OSX and LynxPort.
>> AL
>>
>>
>>
>
>
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>