13a/14a hack = closed circuit?

[John Sievert]

Can't you just tap into the electrical somewhere?  Then you just need to get
a relay with the appropriate voltage coil and put the contact closure to a
DS10.  I presume when this thing thinks it is done, it turns off the motor.

J


On 4/21/05 10:15 AM, "R W" <rdwerner at mac.com> wrote:

> Good suggestion, but I live on a busy corner and would expect cars and
> pedestrians to mess with the motion...
> 
>> I think the easiest answer for the Robomower is to use the W800 and just
>> strap one of the security motion sensors (MS10A?) to the mower.  As soon
>> as the mower stops, the motion sensor will stop seeing the 'world'
>> moving around it, and will say "all quiet".  The MS10A is not as
>> "chatty" as the deadeye sensors, and seems to have a more robust
>> signal.
>> 
>> Or has this been said already?  (resuming my nap, now...)
>> 
>> John
> 

-- 
'Get your facts first, and then you can distort them as much as you please.'
- Mark Twain

John Sievert
Customer 1st, Inc.
2950 Metro Drive, #101
Mpls, MN 55425
(952) 851-7901
(952) 851-7907 fax

This email and any attachments are confidential and may be privileged. This
email is intended solely for the use of the intended recipient.  If you are
not the intended recipient, any use, disclosure or copying of this email and
any attachments is strictly prohibited.  If you receive this email in error,
please notify the sender immediately by reply email and destroy the message
and its attachments.