2-way switches

[John Sievert]

Great!  I use xpress for all my other smart switches but none are two way.
So, this will automatically make it work for me.

J


On 4/14/05 12:55 PM, "Chuck Coleman" <cnk_coleman at mac.com> wrote:

> I use the Levitons and am quite happy with them. They don't report
> local on/off but when a command goes out from X4X they tell the system
> that they are on and at a specific dim level.
> 
> But you have to use the xpress command to make that work. The ordinary
> dim will not get feedback.
> 
> You can also query the switch for status which I used to do with the
> dim command. But with xpress that is not necessary.
> 
> This is different from the X10 plug in modules that will report status
> with the dim command.
> 
> Chuck
> 

--
"You can only be young once.  But you can always be immature."  - Dave Barry

John Sievert
Customer 1st, Inc.
2950 Metro Drive, Suite 101
Mpls, MN 55425

952.851.7901 office
952.851.7907 fax

This email and any attachments are confidential and may be privileged. This
email is intended solely for the use of the intended recipient.  If you are
not the intended recipient, any use, disclosure or copying of this email and
any attachments is strictly prohibited.  If you receive this email in error,
please notify the sender immediately by reply email and destroy the message
and its attachments.